Zanussi-Electrolux ZWF1210W User Manual download pdf (Page 8)

Operating Sequence

Before the first wash, we recommend that you pour 2

litres of water into the main wash compartment of

the detergent drawer in order to activate the ECO valve.

Then run a synthetic cycle at 60°C, without any laundry

in the machine, to remove any manufacturing residue

from the drum and tub.

Pour 1/2 a measure of detergent into the dispenser

drawer and start the machine.

WASHING 4.5 KG OF WHITE COTTON AT 90°C

Suppose you have 4.5 kg of heavy soiled laundry to

wash. It is white cotton and is suitable for high

temperature washing.

1. Load the laundry

Open the door by carefully pulling the door handle

outwards.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible. Close the door.

2. Measure out the detergent

and the fabric softener

Pull out the dispenser drawer until it stops.

Measure out the amount of detergent required, pour it

into the main wash compartment and, if you wish to

carry out the prewash phase,

pour it into the compartment marked .

If required, pour fabric softener into the compartment

marked (the amount used must not exceed the

“MAX” mark in the drawer). Close the drawer gently.

C0096

C0095

P0004

3. Select the required programme

Turn the programme selector dial to the 90 programme.

The light Start/Pause starts to flash

4. Select the spin reduction

or option

Press the option button repeatedly, to select the desired

option. The relevant light illuminates.

5. Select the required option(s)

Select “Prewash” or “Super Rinse” option if required,

the corresponding light illuminates.

132989470.qxd 26/04/2004 10:54 Pagina 8 (Nero/Process Black pellicola)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 26 27

No comments

Zanussi-Electrolux ZWF1210W User Manual Page 8