Zanussi-Electrolux ZWF1012W User Manual download pdf (Page 8)

Operating Sequence

Before the first wash, we recommend that you pour 2

litres of water into the main wash compartment of

the detergent drawer in order to activate the ECO valve.

Then run a cotton cycle at 90°C, without any laundry in

the machine, to remove any manufacturing residue from

the drum and tub.

Pour 1/2 a measure of detergent into the dispenser

drawer and start the machine.

WASHING 5 KG OF WHITE COTTON AT 90°C

Suppose you have 5 kg of heavy soiled laundry to wash.

It is white cotton and is suitable for high temperature

washing.

1. Load the laundry

Open the door by carefully pulling on the door handle

outwards.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible. Close the door.

2. Measure out the detergent

and the fabric softener

Pull out the dispenser drawer until it stops.

Measure out the amount of detergent required, pour it

into the main wash compartment and into the

compartment marked if you have selected the

“prewash” option.

If required, pour fabric softener into the compartment

marked (the amount used must not exceed the

“MAX” mark in the drawer). Close the drawer gently.

3. Select the required programme

Turn the programme selector dial to the programme .

The light “Start / Pause” starts to flash

The pilot lights

corresponding to the various phases making up the

programme come on.

4. Select (spin reduction) or

(rinse hold) option

Press the option button repeatedly, to select the desired

option. The relevant light illuminates.

5. Select the required option

Select “Prewash”, “Easy Iron” or “Half Load” option

if required, the corresponding light illuminates.

35.292.994…ZWF 1012 W.qxd 14/11/06 13:00 Página 8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

No comments

Zanussi-Electrolux ZWF1012W User Manual Page 8