Zanussi-Electrolux ZWF1012W User Manual download pdf (Page 6)

1 Programme guide

Programme Option buttons

Depending on the programme, different functions can

be combined. These must be selected after choosing the

desired programme and before depressing the “Start /

Pause” button.

When these buttons are pressed, the corresponding pilot

lights come on. When they are pressed again, the pilot

lights go out.

If an incorrect option is selected, the corresponding

pilot light flashes for about 2 seconds.

Spin reduction)/ (Rinse

hold) button

By depressing this button you can reduce the final and

the intermediate spin speeds or select the (rinse

hold) option:

(spin reduction): by selecting this option the

speed will be reduced as follows:

Cotton: from 1000 to 500 r.p.m.

Synthetics and wool: from 900 to 450 r.p.m.

Delicates: from 700 to 450 r.p.m.

(rinse hold): by selecting this option the water

of the last rinse is not emptied out, to prevent the

fabrics from creasing.

At the end of the programme the pilot light “End”

illuminates. To drain the water, proceed as follows:

turn the programme selector dial to position “O”;

select programme (drain) or (spin). In this

case reduce the spin speed by means of the relevant

button to adapt it to the fabrics to be spun.

press “Start / Pause” button.

The Control Panel

3 Prewash button

Select this option if you wish your laundry to be

prewashed before the main wash (not available for wool).

The prewash ends with a short spin in programmes for

cotton and synthetic fabrics, whereas in the programme

for delicate fabrics the water is only drained.

4 EASY IRON button

The “Easy Iron” button can be activated for COTTON,

LINEN and SYNTHETIC programmes. This will help to

avoid the problem of clothes becoming wrinkled after

washing, and so make ironing that much easier!

For COTTON programmes, the machine will enable an

impulse spin and an anti-crease phase after the final spin.

For SYNTHETIC programmes, a "cool down" phase is

enabled after the washing cycle and an anti-crease

phase after the final spin.

For COTTON programs, selecting this button will

enable an impulse spin and an anti-crease phase after

the final spin

5 Half Load button

Select this button to reduce water consumption on the

rinse cycle when washing a smaller load of cottons or

linens (maximum load size = 2.25 kg).

The machine will perform 2 rinses instead of 3.

6 Start / Pause button

After having selected the required programme, press

this button to start the machine; the corresponding pilot

light stops flashing and illuminates continuously.

To interrupt a programme which is running, depress the

“Start / Pause” button: the corresponding pilot light

starts to flash.

To restart the programme from the point at which it was

interrupted, press the “Start / Pause” button again.

7 Programme progress display

By selecting the wash programme, the pilot lights

corresponding to the various phases making up the

programme come on.

35.292.994…ZWF 1012 W.qxd 14/11/06 13:00 Página 6

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Comments to this Manuals

No comments

Zanussi-Electrolux ZWF1012W User Manual Page 6

Comments to this Manuals

Related products and manuals for Washing machines Zanussi-Electrolux ZWF1012W