Zanussi-Electrolux ZWF1218W User Manual download pdf (Page 8)

• Delay start, a time value indicated in hours and

selected by means of the relevant button (max 23

hours).

The delay time is displayed for 3 seconds, then the

duration of the selected programme reappears.

After you have pressed the “Start/Pause” button, the

countdown begins, and the delay time value decreases

by one unit every hour and then, when remain the last

2 hours each 30 min.

You can delay the start of the selected programme by

up to 23 hours in one hour intervals.

• An incorrect option selection has been made: this is

indicated by the message Err when a function

incompatible with the current programme is selected.

The incorrect selection is also indicated by an audible

warning signal.

• An alarm code indicates a fault in the machine

operation (see the relevant chapter on page 20).

E20

•

Duration of washing programme in hours and

minutes, after you have selected a programme.

While the programme is running (after you have

pressed the “Start/Pause” button), the displayed time

value decreases by one unit every minute.

• The washing machine has stopped with water in the

tub, at the end of a programme with the “Rinse Hold”

option: this is indicated by a flashing zero.

• The washing machine has completed the

programme: this is indicated by a flashing zero. The

zero will reappear when you switch the washing

machine on, unless the previous programme has been

erased by means of the “Skip Reset” button.

Important!

The first time you use the washing machine, when

you switch it on, it may display a flashing zero and give

an audible warning signal. This is due to the fact that the

washing machine has performed a washing cycle during

the manufacturer’s inspection tests, and this cycle has

not been erased after its completion.

2.05

132984710.qxd 19/07/2005 16:13 Pagina 8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

No comments

Zanussi-Electrolux ZWF1218W User Manual Page 8